Diverse 3000 H_set & Charger 22/3/01 1:54 pm Page 25
Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
Press the OK ( 
) button. Display shows the first location.
Directory for barred/enabled numbers
01 1
Blank.
Memory location
Function number entered previously.
Press the 
MEMORY button if necessary to scroll to the location you want
Press the OK ( 
) button.
Enter the number you want to bar, enable or change. Press the 
button to delete digits.
Press the OK ( 
) button to confirm.
Press the RED PHONE button to return to standby.
Please Note
The barred or enabled numbers
must be switched on before you can
use. See opposite.
0
KEYPAD
1
DEF
3
0
Once you have set the numbers you want, you can then switch call barring/enabling on or off at any time (see below). You can do this from any handset registered to the base station.
Press the SET button.
Press the 0 button twice.
Press the OK ( 
) button.
Enter the base station PIN (original setting
0000).
Press the OK ( 
) button.
Press 1 to bar the numbers you have stored.
3to enable handsets to dial only the
numbers stored.
0to switch call barring/call enabling off.
Press the OK ( 
) button to confirm.
Press the RED PHONE button to return to standby.
25
