Diverse 3000 H_set & Charger 22/3/01 1:55 pm Page 45
Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
Wall mounting
You can choose to place your Diverse 3000 Classic Charger on a desk or attach it to a wall, whichever is most convenient.
The feet of the charging unit do not usually leave marks on surfaces, but if your desk surface is antique, veneered or wooden you may prefer to wall mount the unit.
1.Make sure you check that your charger is within range of the base station before you fix it to the wall (your handset must already have been registered to the base station). To test the range, place the handset in the charger and hold the unit in the position you wish to wall mount it. Press the button on your Diverse base station. If your phone rings in the charger, you are within range and can fix the charger in that position.
2.Make sure that you are not drilling into any hidden wiring and check that the power cable will reach from the mains socket to the charger. Switch the power adaptor off at the mains and remove the adaptor plug from its socket.
3.Drill two holes using a 5mm drill, 25mm deep for the screws, 30mm apart horizontally (see below).
4.Put wall plugs into the drill holes and then insert both screws. Leave 3mm between the head of the screw and the wall. You are now able to mount the charger.
5.Put your handset back in the charger and switch the power back on at the wall socket.
WALL PLUG SCREW
30 mm
WALL
45
