Call barring and Call enabling | BT 3000 Classic specs

Diverse 3000 H_set & Charger 22/3/01 1:54 pm Page 24

Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723

Call barring and Call enabling

You can bar specific numbers, e.g. all international calls by barring the international dial code 00.

Enabling

You can also specifically set a handset so that it can only dial certain numbers.

Call barring affects all handsets registered to the base station.

If a barred number is dialled, the phone hangs up automatically and the barred number is displayed.

You can store up to five numbers as either barred or specifically enabled phone numbers. These can be pre-fix numbers, eg 00 for all international calls. Incoming calls are not affected.

Please Note

Emergency Services 999 calls can

be made at all times.

Please Note

From switchboards you can dial:

–The access code (e.g. 9)

followed by 112.

Or

–R 112.

Warning

You cannot dial 9 999 or R 999 from behind a switchboard when call barring is set.

Directory for barred/enabled numbers

To: Bar numbers.

Enable handsets to call only specified numbers.

Create a memory list.

Press the SET button.

0Press the 0 then the

11 buttons.

Press the OK ( ) button.

KEYPAD Enter the base station PIN (original setting

0000).

24

Image 28

BT 3000 Classic manual Call barring and Call enabling, Directory for barred/enabled numbers

Contents

User Guide Diverse 3000 foldout 1 22/3/01 206 pm Diverse 3000 foldout 2 22/3/01 206 pm At a glance Number Scroll backwards Confirm OK Scroll forwards Diverse 3000 Hset & Charger 22/3/01 153 pm Using your Diverse Classic Handset This guide Quick Reference Handset Display EXT INT Information for the handset settings Quick Guide Introduction Unpacking your Diverse 3000 Classic handset Safety information CleaningGeneral Environmental Approved rechargeable batteries Setting up Install the rechargeable Batteries in the handsetSlide battery cover down and lift off Connect the power cable Battery low warning To register your new Handset to the base station Press the SET buttonPress the OK Button. The flashes Station. The stops flashing Fit the belt clip onto the back of the handset Fitting the belt clipPlease remove Protective film from the display Using your Diverse 3000 Classic Handset To switch the handset on and offTo switch the keypad lock on and off Press and hold the # Making and receiving calls To make an external call To end a callTo call another handset To call all handsets Press the button. Display shows the last number dialled Call timerTo redial any of the last 5 external numbers To delete the redial memory Secrecy Press the Recall button to speak to your caller again To transfer an external caller to another handset During a callHold To receive an internal call Using the memory to store and dial numbers Handset must be switched on Press the SET buttonTo store a number in the memory Press the OK button, enter your new number To speed dial a stored number Security features To delete all memory numbers To change the handset PIN To lock and unlock the handset To switch external dialling off and on Enter the number of the handset you want to disablePress the 2 button to Allow the handset to Press the SET button Press the 0 button Press the 2 button Press the OK buttonMy additional emergency numbers are To dial your additional emergency numbers Directory for barred/enabled numbers Call barring and Call enabling Press the OK button. Display shows the first location Using Caller Display and Call Waiting BT’s Caller Display and Call WaitingTo take the Call Waiting On hold. You can use Information displayed via other UK networks Using the Classic handsetTo view the calls list To dial a number in the calls list To delete the calls list Additional features Press the SET button MNO Press the 6 button. YouYou hear the melody Melody To adjust the earpiece volume To switch the handset button beeps on and offIf the battery is exhausted Level you want To switch music on hold on or off To switch the base station display in the handset on/offDEFPress the 3 button Press the SET button Press the 1 button To switch auto talk on and off Press the 7 buttonTo change between base stations Press the SET button INT Press the INT button To set your handset to priority base station selection To reset the handset to its original settings Handset PIN Registration to the base stationCall allocation Handset ringer tone to Ring priority DEF ABC To set the number of rings on ring priority Using your Diverse 3000 Classic with a switchboard It is possible to set Tone with To insert an access code To set the access pause Guarantee Conditions of this guarantee areWithin the 12-month guarantee period Outside the 12-month guarantee period Technical information Switchboard external line access codeHow many telephones can you have? Help Emergency calls No dial tone Wall mounting Index Handset Transfer to another handset Offices worldwide