Diverse 4000 Classic ~10th Edition ~ 19th September ’01 ~ 4167
11
3Registering and charging
the handset
The display is protected by a plastic
film. You can remove this protective
film from the display.
Insert the batteries
Insert the two batteries supplied, as
indicated on the label inside the
battery compartment and slide the
battery compartment cover shut.
The battery cover may be found in
the packaging with the batteries.
WARNING
Under no circumstances should non-
rechargeable batteries be used. Only
use the approved batteries. Using
unapproved batteries will invalidate
your guarantee and may damage
the telephone.
To register your handset, place it in
the main Diverse 4000 base station
with the display facing upward.
After approx. one minute, the
handset’s internal number is
displayed (eg: INT2). Successful
registration is signalled by a
confirmation tone.
Replace the newly registered
handset into the Classic Charger
Unit and leave to charge for
approximately 16 hours. The
charging status icon flashes on the
handset to indicate that the
batteries are being charged.
When the handset is registered the
display will show:
If the icons on the display flash
continuously…
It means that the handset is not
registered with the base station.
Ensure you have correctly carried
out step 3 above.
All additional handsets you purchase
will need to be individually
registered with the base station before
they will work.
SETTING UP