BT 400 Plus Back of the telephone, Plug the mains adaptor into the wall socket and switch on

Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ 5290

4 Check Dial Mode setting (default TB)	5	Plug the mains adaptor cord into the
		back of the telephone

Use the dialling mode switch on the underside of your Paragon 400 Plus.

Your Paragon 400 Plus should be pre-set to TB which gives you Tone dialling. This ensures the phone will work with all modern digital exchanges.

P

T

TB

MODE

HANDSET

If you do not get a dialling tone, try setting the dialling mode to P.

If you are connecting to a switchboard, check with your switchboard operator or communications manager which dialling mode you need. Your Paragon 400 Plus is approved for all compatible switchboards.

9V DC LINE

6Plug the mains adaptor into the wall socket and switch on

The Paragon 400 Plus automatically goes through a start up process during which the display shows INITIALISING and the monitor light flashes.

On completion the unit display will show the time and number of messages.

SETTING UP

Note

For most switchboards the switch should be

set to T.

7