BT 400 Plus manual Using the quickdial memory, To delete a number in the redial list

Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ 5290

To delete a number in the redial list

Redial Press the REDIAL button.

To select the entry for deletion.

Del Press DEL to delete the entry.

To adjust the earpiece volume

KEYPAD

Shift





If number is being stored as 2 touch

(M11-M20) then:

Enter the number to be stored and quickly press and release the SHIFT button, then press and hold M1-M10until prompt begins.

The prompt will say “(telephone number) is stored in memory 11” and display will show M11 stored.

Vol

To increase the volume in the earpiece. Display indicates the level.

To decrease the volume in the earpiece.

After replacing the handset, the volume returns to mid level.

Note

If you make a mistake when entering a number,

press the DEL button to delete the last digit.

To stop the process at any time, press the

ANSWER ON/OFF button.

To make a quickdial call TELEPHONE

Using the quickdial memory

You can store 20 telephone numbers, each up to 32 digits long. The first 10 are stored under the locations M1-M10. The second 10 are stored under the locations M11-M20 using the shift key.

To store a quickdial number

KEYPAD Enter the number to be stored.



Press and hold the M1-M10location you want the number stored in until the prompt begins.

HANDSET

QUICKDIAL



Shift





Lift handset or press the MONITOR or DIAL/OK button.

Press the M1-M10button where the number you want is stored. The selected number is displayed and dialled.

If using MONITOR lift handset when connected.

If dialling a 2 touch Quickdial number:

Press the SHIFT button and then M1-M10and the number is dialled.

The prompt will say “(telephone number) is stored in memory 1” and display will show MO1 stored.

11