PaperJet 60 user guide – Edition 3 – 29.8.00
19

To fax from memory

Your PaperJet 60 has a memory which lets
you store one document for sending at a
pre-set time.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Display shows
TX FROM MEMORY
The document is scanned into the memory.
Display shows
STORING
then
TYPE TIME
HH:MM
Enter the time at which you want your fax
to be sent, e.g. 18.30 or press the Start
button to select the current time.
Display shows
TYPE FAX NUMBER
Use the keypad to dial the number you
want.
Display shows
TYPE FAX NUMBER
. If
required, enter the second number to which
you want to send your fax and press the
Start button again.
Display shows
TYPE NUMBER
and the
number already entered.
You can change the number if required.
Display shows
TYPE NUMBER
and the next
number if already entered.
You can now change the number if required
and repeat the last 2 steps for all entered
numbers. When all existing numbers have
been shown the display shows
TYPE FAX
NUMBER
.
Enter a new number if required.
Display shows
TYPE FAX NUMBER
.
Repeat the last 2 steps until you have entered
all the numbers you want up to a maximum
of 10.
To broadcast a document
You can set your machine to send a document to up
10 different numbers (broadcasting).
See “To fax from memory”below.
If using the 12 hour clock, press the Function
button to switch between afor
AM
and pfor
PM
.
Press the < > buttons to move the cursor.

To change, re-send or cancel a stored

document

When you have stored a document in the
memory for sending later:
Display shows
AUTOMATIC RX
MEMORY TX
Display shows
TX FROM MEMORY
Display shows
ALREADY ENTERED
Display shows
PRINT SETTING?