Getting started

9

 

 

Setting up for multiple packs

If you have purchased a BT Freestyle 710 multiple pack, you will need to prepare any additional handsets and chargers for use.

For each additional handset and charger:

1.Insert the cable through the channel at the rear of the charger and insert the plug into the power socket. Plug the other end into the mains wall power socket and switch on.

2.Batteries will come inserted in the battery compartment. Pull the plastic tag as instructed to activate the batteries. Charge the battery for at least 20 hours.

Any additional handsets supplied as part of a multipack are pre-registered to the base so, once charged, are ready for use. The handset number is shown in the display.

Your BT Freestyle 710 is ready for use.

Using your BT Freestyle 710 on a Broadband line?

If this product is to be used on a broadband line then you must ensure that it is connected via an ADSL microfilter. Using this product on a Broadband line without an ADSL microfilter may cause problems with this product and your Broadband service.

Additional BT ADSL microfilters can be purchased from www.shop.bt.com

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com

Page 9
Image 9
BT manual Setting up for multiple packs, Your BT Freestyle 710 is ready for use