BT BT RELATE 3000 manual Relate 3000 check that, Handset hook

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 9

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

Getting started 9

Wall-mounted	Before you wall-mount your BT
	Relate 3000 check that:

Use the base stand provided as a template to pencil on the wall where the drill holes should go.

1.Drill the holes for the screws using a 8mm drill bit. Then insert the wall plugs provided.

2.Insert the screws, leaving about 5mm sticking out.

3.Insert the clips on the base stand into the holes in the base of your phone marked WALL MOUNT. You may need to be quite firm to fix it securely.

The wall can support the weight of the phone.

The position you choose leaves sufficient space so that the phone is clear of any obstruction on the wall, such as a shelf or a cupboard.

The power cable and telephone line cord will reach their correct wall points.

4.Position the wall-mounting slots in the base stand over the screw heads and gently pull the phone downward to make sure it is securely in place. You will need to rotate the handset hook to stop the handset from falling off.

Handset hook

Rotate the handset hook 180˚ so that the handset will stay in position when the phone is wall-mounted.