6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 7
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
| Getting started | 7 |
2. Plug the other end into the mains power wall socket. | The voice prompts will not work if |
|
| the mains power is not connected |
|
batteries | and switched on. |
|
|
|
WARNING Please disconnect
the telephone line cord before opening this cover
Connect the telephone line
1. Plug the telephone line cord into the telephone wall socket.
Setting the time
1.Press . Display shows WHERE?. Now press (located between the and memory buttons). The display briefly shows SETUP MODE then HOLD STORE TO EXIT before moving to the first option RINGER TONE.
2.Press repeatedly until the display shows 12:00AM or the currently set time.
3.Use the keypad to enter the time, e.g. 0907 = 9:07.
The clock is 12 hour format.
4.Use the buttons to select AM or PM, then press to save the settings and return to standby.
If you have subscribed to your network’s Caller Display service, the time will be set automatically when you receive your first call.
Holding the button down will save any settings changed and exit the