4Setting up
Place your BT eFrame close enough to a mains power wall socket so that the cable will reach.
1 Set up the eFrame
• Loosen the knob on the back of the frame and move the stand to adjust the angle of the display. You can position the stand in portrait or landscape format. Make sure you tighten the knob securely after adjustment.
Adjustment knob | Stand |
•Plug the mains power adaptor into the side of the BT eFrame, then plug the other end into the wall socket and switch the power on.
Only use the cables provided.
The Welcome screen is displayed (Fig. 1).
Fig. 1
8557 BT eFrame QSG [4].indd 4 | 1/5/08 12:32:04 |
