Response 15+ - Edition 5 – 26th October ’00
Using your Response 15 Plus
Answering machine controls
To switch the answering machine on and off
Press buttons in the order shown.
Answer Press and release the Answer
on/off
on/off button. Your Response 15 Plus will announce ‘Answer off.’
When off, the display shows a single dash.
Answer Press and release the Answer
on/off
on/off button again. Your Response 15 Plus will announce ‘Answer on.’
When on, the display shows the number of messsages received e.g 5.
Volume + | Press + to increase the |
| volume. |
– Volume | Press – to decrease the |
| volume. |
| As you press, a beep sounds |
| at the level you are selecting. |
| When the volume is at its |
| highest or lowest level you will |
| hear 2 beeps. |
Please note
If you alter the volume during playback of a message, the beep does not sound but the volume will change accordingly.
If the volume is set to below
To adjust the loudspeaker volume
You can adjust the volume of your outgoing message, incoming message, memos and voice prompts.
There are 8 levels to choose from. The default level is
To set the day and time
| Your Response 15 Plus will | |
| announce the day and time an | |
| incoming message or memo | |
| was recorded. | |
| To check the day and time | |
Delete | Press and release the Delete | |
button. Your Response 15 Plus | ||
| ||
| announces the day and time in | |
| hours and minutes. |
8
