BT Response 15+ manual Setting up, Plan the location of your Response 15 Plus

Response 15+ - Edition 5 – 26th October ’00

Setting up

Follow these steps to set up your Response 15 Plus ready for use

Plan the location of your Response 15 Plus

Situate your Response 15 Plus close enough to the phone and mains power sockets so that both cables will reach.

1Check your telephone wall socket

3Plug the adaptor into a mains power socket

If you do not have a modern phone socket, call Freephone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.

2. Plug the mains power cord into the back of the machine

The display will flash for 20 seconds.

It will then show the normal ‘no messages’ display. The display will flash slowly until any button is pressed.

4Insert the back-up battery

Before inserting the back-up battery you must ensure that your unit is connected to the mains power.

BT recommends that you insert an alkaline PP3 9V battery (not supplied) to provide up to 6 hours back-up. This will ensure messages are saved in the event of power failure.

USE ONLY APPROVED	TELEPHONE
9V DC ADAPTOR

5