Response 15+ - Edition 5 – 26th October ’00
Call counter
The counter will display the number of messages that have been recorded in the memory.
If you have received 10 or more messages the display will flash
9to indicate this. See page 18 for a guide to the display.
will announce the answer delay options and display the number of rings.
When you hear your desired setting, release the Answer on/off button. After 2 seconds your Response 15 Plus will announce the new answer delay setting and then return to ‘answer on’ mode.
To set the answer delay
Answer delay sets the number of times your Response 15 Plus will ring before answering a call.
Your Response 15 Plus’ answer delay is
Time Saver
Your Response 15 Plus can be set to Time Saver mode. This means that during remote access, if any messages have been recorded your Response 15 Plus will answer after only 2 rings. If there are no messages, it will answer after 6 rings, thereby allowing you the option of hanging up before your Response 15 Plus answers, to avoid the cost of a call.
Press and hold the Answer on/off Answer button. Your Response 15 Plus
on/off
will announce the current answer delay: ‘Answer delay 4 rings.’
Keep holding the Answer on/off button. Your Response 15 Plus
To check the answer delay setting
Answer Press and hold the Answer
on/off
on/off button. Your Response 15 Plus will announce and display the current answer delay setting.
Receiving messages
Your Response 15 Plus will automatically record an incoming message when it is connected to your phone socket and set to ‘answer on’.
When your Response 15 Plus has received new messages, the message counter will display the number of messages you have received.
Please note
Two minutes is the maximum time allowed for each incoming message. If the maximum message length is reached, your Response 15 Plus will announce ‘Thank you for calling’ and disconnect the line.
11
