BT Response 15+ manual To delete your outgoing message

Response 15+ - Edition 5 – 26th October ’00

To record your outgoing message

To check your outgoing message

You can record your own outgoing message to replace the pre-recorded message. If you record your own message, the pre-recorded message will be automatically removed and stored in the memory, in case you wish to reinstate it.

Stop

Press and release the Stop button.

Your Response 15 Plus will beep and play back your outgoing message. It will then beep again and return to ‘answer on’ mode.

Please note

Your outgoing message may sound something like this: ‘Hello, I’m sorry I can’t take your call at present. If you would like to leave a message, please speak after the tone.’

To record your outgoing

message speak clearly 15–20cm

from the in-built microphone.

To delete your outgoing message

You can delete your outgoing message and return to the Response 15 Plus’ pre-recorded outgoing message.

Stop	Press and release the Stop
	button. Your outgoing message
	will be played back to you.

	Read all the steps before you
	begin recording.
Stop	Press and hold the Stop button.
	Your Response 15 Plus will
	beep and display ‘r’.
	Keep holding down the Stop
	button and speak your message
	into the microphone.
	When you have finished
	speaking, release the Stop
	button. Your Response 15 Plus
	will beep, play back your
	message, then beep to confirm
	the recording. It will then return
	to ‘answer on’ mode.
	To re-record your message
	repeat this procedure.

Delete

During playback of your outgoing message press the Delete button.

Your Response 15 Plus will beep and play its pre-recorded outgoing message.

Your own message has now been replaced by the Response 15 Plus’ original pre-recorded outgoing message.

10