8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 12
BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796
12Using your BT Baby Monitor 100
Helpline
If you have any problems using your BT Baby Monitor 100, call 0808 100 6554*.
If you place the Parent and Baby units too close together you will hear a high pitched noise, this is normal. The units are designed to be located at a distance from one another, e.g. in separate rooms.
Do not press the Talk button when the Baby unit and Parent unit are positioned in the same room. High- pitch noise will be generated if the Talk button is pressed when Baby unit and Parent unit are close to each other or within 3 metres distance.
Put down / mute the Parent unit before you go into the nursery in order to prevent any
Switching on/off
Switch on the Parent unit
1.Press and hold 
. The Link LED on the far left will illuminate.
Keep pressing the 
button until the 3 LEDs to the far right illuminate as well. The Parent unit is now switched on and will search for and link itself to the Baby unit.
Switch on the Baby unit
1.To switch on, press 
. The Green Link light comes on to show that the unit is within range of the Parent unit.
Switching off both units
1.To switch Off, press 
until the display goes blank and the link light goes off.
Changing Baby unit from battery to mains power
To conserve battery power on the Baby unit or when the batteries are low or flat, plug the Baby unit into the mains. If currently running on batteries and switched on, changing from battery to mains power will be instant and not affect any of the settings.
You can use the Parent unit to monitor baby while it is charging.
If you experience any problems, please call the Helpline on 0808 100 6554*
