Configuration without Software
You may also enter the
Refer to your operating system documentation on how to configure a Static IP address. The Ethernet Converter has an IP address of 1.1.1.1 by default. You'll need to configure the computer to be on the same subnet; an IP address of 1.1.1.2 is recommended for the computer.
With the included network patch cable, plug the Ethernet Converter's LAN port into an open port on your network's router, or on one of your network switches or hubs. If there are no ports available, you can temporarily remove a computer or other connected device and plug the Ethernet Converter to that port. You can plug the Ethernet Converter directly to the configuring computer.
Once the network cable has been plugged in, plug the Ethernet Converter's AC Adapter into an available power outlet. Then attach the power connector to the back of the Ethernet Converter. The boot up process takes less than a minute and is completed when both the Wireless and Ethernet lights are lit.
Once your computer has a Static IP address of 1.1.1.2, open your web browser and access the web page 1.1.1.1 by typing it into the address field (as shown below) and pressing enter.
You will be prompted for a username and password. By default, the username is root and there is no password.
Press the OK button.
