Buffalo Technology WLI-TX4-G54HP setup guide Web Based Configuration

Web Based Configuration

Welcome to Web-based Configuration, where changes to the Ethernet Converter's configuration are made. In Web Based Configuration, you can change the wireless network the Ethernet Converter is associated with, the IP address of the Ethernet Converter, and other important settings.

After logging in on the previous pages, you will be greeted by the main configuration page. This page quickly shows you what network the Ethernet Converter is connected to as well as allowing you to search for available networks.

The first step in the Web Based Configuration should be to search for an available wireless network. To do this, press the Search button in the SSID (Network Name) table.

NOTE: If the wireless network you are attempting to connect to is not broadcasting its SSID, you will need to manually enter the SSID into the SSID field. After it has been manually entered, press the Apply Settings button.

Press Search to scan for local access points that are broadcasting their SSID. Select the wireless network that you would like to connect to and press the Select button. Finally, press Set on the main settings page to ap- ply your settings.