The IP Address Setup window will open. Check the box next to Use DHCP and press the OK button. The Ethernet Converter will reboot; this process may take as long as a minute. The Ethernet Converter Manager will then
NOTE: If you want to give your Ethernet Converter a static IP address, than you can skip checking Use DHCP and enter your own IP address and Subnet mask in the cooresponding fields. If using a static IP address, it is recommended to pick one inside your existing network's subnet.
Search Results will appear again. If more than one Ethernet Converter is present, select the proper Ethernet Converter from the list. Then press the Configure button.
The Ethernet Converter Manager will connect you to the Ethernet Converter's web based configuration tool. You will be prompted for a username and password.
By default, the username is root and there is no password.
After entering the user name, press the OK button. Turn to page 8 to continue configuration.
