Manual Configuration
If your wireless router/access point doesn't support AOSS, you'll need to configure the access point manually. There are two ways to do this: you can use the Ethernet Converter Manager software if you have a Windows PC on the network (98/ME/2000/XP only), or you may use a web browser. Web browser configuration may be done with any computer running a recent web browser, including Macintosh and Linux machines (Skip to page 7 for web based config).
Ethernet Converter Manager
If you have a Windows 98/ME/2000/XP machine with a
•Connect one of the Ethernet Converter's LAN ports to an open port on your network's router, switch or hub with the included network patch cable. If there are no ports available, you can temporarily remove a computer or other connected device and plug the Ethernet Converter to that port. You can plug the Ethernet
Converter directly to the configuring computer, but will have to configure settings manually as described on page 8.
•Once the network cable has been plugged in, plug the Ethernet Converter's AC Adapter into an available power outlet. Then attach the power connector to the back of the Ethernet Converter. The boot up process takes 30 seconds and is complete when both the Wireless and Ethernet LEDs are lit.
•Return to the PC designated for configuration and insert the included Ethernet Converter
•The Ethernet Converter Utility should launch automatically. If it does not, browse your
