Buick 2005 manual

1.Squeeze the angled latch release bar toward the straight crossbar while placing the front hooks of the bench seat onto the front two floor pins.

2.Make sure that the bench seat is angled so that the front hooks clear the floor pins. If the front legs are not attached correctly, the rear legs will not attach to the rear set of floor pins.

3.Firmly push the rear hooks onto the rear floor pins by pushing down on the rear of the seat.

4.Try to raise the seat to check that it is locked down.

5.Lift the seatback recliner lever and raise the seatback until it locks upright.

6.Push and pull on the seatback to check that it is locked upright.

7.Attach the lap belt.

1-12