Buick 2005 manual Windshield Wiper Blade Replacement, Replacement Bulbs, Exterior Lamp Bulb Number

10.Put the bulb assembly back into the lamp housing and turn the bulb socket one-quarter of a turn clockwise.

11.Replace the applique on the liftgate.

12.Gently lift the liftgate.

13.Reinstall the seven wing nuts and the four outboard nuts.

14.Reinstall the panel inside the liftgate by connecting the tabs.

15.Close the liftgate.

Replacement Bulbs

Exterior Lamp	Bulb Number
Front Turn Signal/Parking Lamps	3457K
Headlamps
High-beam	9005
Low-beam	9006
Liftgate-Mounted
Back-Up Lamps	921
Taillamps	161
Rear Outboard Stop/Tail/Turn	3057K
Sidemarker Lamps	168

For replacement bulbs not listed here, contact your dealer.

Windshield Wiper Blade Replacement

Windshield wiper blades should be inspected at least twice a year for wear or cracking. See “Wiper Blade Check” under Owner Checks and Services on page 6-8for more information.

Replacement blades come in different types and are removed in different ways. For proper type and length, see Normal Maintenance Replacement Parts on page 6-13.

Here’s how to replace the windshield wiper blades:

1.Turn the wipers on to the lowest intermittent setting.

2.Turn off the ignition while the wipers are at the outer positions of the wipe pattern. The blades are more accessible for removal/replacement while in this position.

3.Pull the windshield wiper arm away from the windshield.

5-53