Not all DVDs support all the feature defaults in the setup menus. In the event a particular feature is not supported, defaults will be provided by the DVD media.

Exit the setup menu by pressing the return button on the remote control or the DVD player. If changes are made to the system setup defaults, the disc will resume play from the beginning and not where it previously left off.

Battery Replacement

To change the remote control batteries, do the following:

1.Unclip the battery door located on the back of the remote control.

2.Replace the two AA batteries in the compartment. Make sure that they are installed correctly, using the diagram on the inside of the battery compartment.

3.Close the battery door.

If the remote control is to be stored for a long period of time, remove the batteries and keep them in a cool, dry place.

Tips and Troubleshooting Chart

Problem

Recommended Action

 

 

No power.

The ignition may not be in

 

ACCESSORY, ON,

 

START, or RAP. The

 

parental control button

 

might have been pressed.

 

The power indicator light

 

will flash.

 

 

Disc will not play.

The system might be off.

 

The parental control

 

button might have been

 

pressed. The power

 

indicator light will flash.

 

The system might be in

 

auxiliary source mode.

 

Press the SRCE button to

 

switch between the DVD

 

player and the auxiliary

 

source. The disc is upside

 

down or is not compatible.

3-125

Page 263
Image 263
Buick 2005 manual Tips and Troubleshooting Chart, Problem Recommended Action