Buick 2005 Front Turn Signal, Sidemarker and Parking Lamps, Taillamps, Turn Signal, and Stoplamps

Front Turn Signal, Sidemarker and Parking Lamps

To replace the front turn signal, parking or sidemarker lamp bulbs, follow the headlamp bulb replacement procedure and replace the appropriate bulb.

Taillamps, Turn Signal, and Stoplamps

1.Open the liftgate. See Liftgate on page 2-11for more information.

2.Remove the two screws on the inboard taillamp panel.

3.Pull the lamp directly rearward from the vehicle.

4.Turn the bulb socket one-quarter of a turn counterclockwise.

5.Pull the bulb assembly out from the lamp housing.

6.Unhook the electrical connector by lifting up the tabs and separate the connector from the bulb base.

7.Install the new bulb into the electrical connector. Push the bulb firmly enough so that the tabs hook over the tab on the bulb.

8.Reverse the steps to reinstall.

9.Reinstall the lamp to its pocket by lining up the mounting pin and pushing forward to set the position.

10.Reinstall the screws removed in Step 2.

11.Close the liftgate.

5-51