POWDER PRODUCT STRENGH ADJUSTMENT

The strength of the individual powdered beverages can be adjusted by changing the hopper motor speed. See menus under “DRINK STRENGTH #” in the program menus to adjust the hopper dispense rate for each hop- per.

DRAINING THE HOT WATER TANK

CAUTION - The dispenser must be disconnected from the power source throughout these steps

1.Disconnect the dispenser from the power source.

2.Open front door and place ON/OFF/NIGHT switch in the “OFF” (center) position and let the water in the tank cool before draining.

3.Shut off and disconnect the incoming water supply.

4.Remove the drip tray and access panels below the door.

5.Pull the clamped end of the silicone tube out of the dispenser and direct it into a drain or a container large enough to hold the volume of water in the tank, 7.2 gallons.

6.Make certain the shut off clamp is locked tightly on the tube, and then remove the snap type clamp and plug from end of tube.

7.Carefully release the shut off clamp to let the water drain from the tank.

NOTE - The dispenser must be refilled using the INITIAL FILL & HEAT steps before reconnecting to the power source.

PREVENTIVE MAINTENANCE

Bunn-O-Matic®Corporation recommends that preventive maintenance be performed at regular intervals. Maintenance should be performed by a qualified service technician. For Technical Service, contact Bunn-O-Matic®Corporation at 1-800-286-6070.

NOTE: Replacement parts or service caused by failure to perform required maintenance is not covered by warranty.

Touchscreen special cleaning instructions:

•Use a soft lint-free cloth. The 3M Microfiber Lens Cleaning Cloth is especially recommended for cleaning touch panels without requiring liquid cleaner.

•The cloth may be used dry, or lightly dampened with a mild cleaner or Ethanol.

•Be sure the cloth is only lightly dampened, not wet. Never apply cleaner directly to touch panel surface; if cleaner is spilled onto touch panel, soak it up immediately with absorbent cloth.

•Cleaner must be neither acid nor alkali (neutral pH).

•Wipe the surface gently; if there is a directional surface texture, wipe in the same direction as the texture.

•Never use acidic or alkaline cleaners, or organic chemicals such as: paint thinner, acetone, tolulene, xy- lene, propyl or isopropyl alcohol, or kerosene.

•Suitable cleaning products are commercially available pre-packaged for use; one example of such a prod- uct is Klear Screen™ <http://www.nushield.com/products_main_klear.htm>, or commercially available off- the shelf retail brands such as Glass Plus® Glass and Surface Cleaner made by Reckitt-Benckiser <http:// www.glassplus.com/>.

•Use of incorrect cleaners can result in optical impairment of touch panel and/or damage to functionality.

NOTE: Most products contain 1-3% Isopropyl Alcohol by volume, which is within acceptable limits for Resis- tive Touch Panel cleaning use.

CAUTION: Many products contain Ammonia, Phosphates, and/or Ethylene Glycol, which are NOT ACCEPT- ABLE; check product content label carefully.

9

45304.1 090611

 

Page 8 Page 10
Page 9
Image 9
Bunn 14 manual Powder Product Strengh Adjustment, Draining the HOT Water Tank, Preventive Maintenance
Page 8 Page 10

14 specifications

The Bunn 14 is a premium coffee maker known for its durability, efficiency, and ability to brew high-quality coffee quickly. As a staple in both commercial and home settings, the Bunn 14 has gained a strong reputation among coffee enthusiasts and professionals alike.

One of the main features of the Bunn 14 is its capacity to brew up to 14 cups of coffee in just a few minutes. The design is focused on speed without compromising flavor, making it ideal for busy households or cafes that demand quick service. The patented brewing system utilizes hot water stored in an internal tank, ensuring that coffee grounds are saturated at the optimal temperature for extraction.

Another notable technology employed in the Bunn 14 is the Jet Action spray head. This innovative feature ensures an even distribution of water over the coffee grounds, maximizing flavor extraction and creating a rich, aromatic cup of coffee. Additionally, the temperature control system allows users to maintain the ideal brewing temperature, which is essential for achieving the best flavor profile.

The Bunn 14 is built to last, utilizing high-quality materials and a robust design that withstands the rigors of daily use. The stainless-steel construction not only enhances durability but also contributes to the overall aesthetic of the product, making it an attractive addition to any kitchen or coffee station.

Ease of use is another characteristic that sets the Bunn 14 apart. The simple on/off switch, along with an easy-to-read water level indicator, ensures that brewing is straightforward even for those unfamiliar with coffee makers. The coffee maker also features a drip-free carafe, which makes pouring and serving hassle-free.

Cleaning and maintenance are also made simple with the Bunn 14. The removable filter basket is easy to access and clean, while the carafe is dishwasher safe, ensuring that users can keep their machine clean and in top working condition with minimal effort.

Overall, the Bunn 14 is an exceptional coffee maker that combines speed, efficiency, and quality. Its innovative technologies, durable construction, and user-friendly features make it a favorite among both casual coffee drinkers and serious aficionados. Whether at home or in a commercial setting, the Bunn 14 consistently delivers a satisfying coffee experience.
Top Page Image Contents