20
TROUBLESHOOTING (cont.)
PROBLEM
Dispenser is making unusual noises.
(Some noises are a normal occurance
with this type of device. You need to
become familiar with those that are
normal, to determine when they have
become unusual.) (cont.)
Product is leaking into the inside of
the drum.
PROBABLE CAUSE
3. Fan Motor
4. Auger Motor(s)
1. Worn Shaft
2. Worn Seals
REMEDY
Remove the air filter at the rear of the
dispenser and listen for fan motor
noise. Replace the motor if exces-
sively noisy.
Place the Auger switches in the “ON”
position and the ICE/OFF/NO-ICE
switches in the “OFF” position. Listen
for auger motor noise. Replace the
motor if excessively noisy.
Replace Shaft. Refer to Service - Au-
ger Shaft Assembly. See page 24.
Replace Cooling Drum Seal. Refer
to Service - Auger Shaft Assembly.
See page 24.
27646 122200