Bunn CDS-3 service manual Fuse and Fuse Holder

Models: CDS-3

1 60
Download 60 pages 54.74 Kb
Page 40
Image 40

SERVICE (cont.)

FUSE AND FUSE HOLDER

FIG. 33 FUSE HOLDER

P1342

 

Location:

The fuse holder is located inside the dispenser on the upper left side of the component bracket just below the circuit breaker.

Test Procedures:

1.Disconnect the dispenser from the power source.

2.Remove cap and fuse from fuse holder.

3.Remove fuse from the cap.

4.Check for continuity through the fuse.

If continuity is present as described, reinstall the fuse, the fuse is operating properly.

If continuity is not present as described, replace fuse.

Removal and Replacement:

Fuse:

1.Remove the cap from the fuse holder.

2.Remove fuse from the fuse holder, inspect, if blown discard.

3.Install new 5 amp fuse in the fuse holder

4.Reinstall fuse holder cap.

Fuse Holder:

1.Disconnect the wires from the rear of the fuse holder.

2.Remove nut securing the fuse holder to the com- ponent bracket.

3.Push fuse holder through the hole in the component bracket.

4.Install new fuse holder and fuse through the hole in the component bracket.

5.Secure the fuse holder to the component bracket.

6.Refer to Fig. 34 and reconnect the wires.

WHI/GRN from Main

Harness/ON/OFF

Switch

WHI/GRN from Main

Harness/Control Board

 

P1331

FIG. 34 FUSE HOLDER TERMINALS

 

 

40

27646 022500

 

Page 40
Image 40
Bunn CDS-3 service manual Fuse and Fuse Holder

CDS-3 specifications

The Bunn CDS-3 is a commercial coffee brewer renowned for its reliability, efficiency, and high-quality performance. Designed for busy environments such as cafés, restaurants, and convenience stores, it offers the perfect balance of capacity and functionality, making it ideal for high-demand situations.

One of the standout features of the Bunn CDS-3 is its ability to brew up to 3.8 gallons of coffee per hour. This impressive capacity meets the needs of busy establishments where a constant supply of fresh coffee is crucial. The brewer’s stainless steel construction not only ensures durability but also maintains temperature, thus preserving the coffee’s rich flavor and aroma.

The CDS-3 incorporates Bunn's patented brewing technology, including the "Pour-Over" method. This feature allows for easy operation and contributes to the even extraction of coffee grounds. The machine is equipped with a pre-infusion mode that saturates coffee grounds before brewing, enhancing extraction for a fuller, more complex flavor profile.

Temperature control is another vital characteristic of the Bunn CDS-3. It maintains the water temperature between 195°F to 205°F, the ideal range for optimal coffee brewing. The brewer’s internals are designed for rapid heating, ensuring that the water reaches the desired temperature quickly and consistently, which is essential for high-quality coffee production.

In terms of usability, the Bunn CDS-3 offers an intuitive interface, allowing staff to operate it with minimal training. The front-access design not only simplifies maintenance, but also makes it easy to refill water and perform routine cleaning. Furthermore, the large capacity coffee pots ensure that the brewed coffee can be stored efficiently, minimizing waste.

Equipped with a unique spray head system, the Bunn CDS-3 ensures uniform saturation of the coffee grounds. This feature supports optimal extraction, allowing users to produce a rich and flavorful brew that keeps customers coming back for more.

In summary, the Bunn CDS-3 is a well-engineered, commercial-grade coffee brewer that excels in high-demand environments. Its robust construction, advanced brewing technology, consistent temperature control, and user-friendly design make it a favorite among coffee enthusiasts and professionals alike, affirming its reputation as a reliable and effective solution for coffee brewing needs. Whether for a bustling café or a catering service, the Bunn CDS-3 delivers a consistently great cup of coffee every time.