Manuals / Bunn / Kitchen Appliance / Beverage Dispenser

Bunn CDS-3 service manual Lubrication, Faucet Handles, Disassembly, Assembly

Models: CDS-3

1 60
Download 60 pages 54.74 Kb
Page 14
Image 14

LUBRICATION (cont.)

10.Reinstall the black plug into the faucet spool. Do not lubricate the plug.

13.Reinstall the plastic caps, springs, spools, and metal pins. Spread the dispense

11.Apply a thin film of lubricant to each faucet spool O-ring.

14.Plug in the hopper lid lamp cables.

12.Slide the O-rings onto the spools.

15.Assemble the drip tray.

handles and reinstall them. NOTE – When reinstalling the faucet

caps, they MUST be twisted as far as they will go. (Past the point where it clicks.)

NOTE – The faucet spool plugs, faucet O-rings, cooling drum hopper seals, and auger shaft seals are to be replaced whenever they appear worn or damaged. Bunn-O-Matic recommends their replacement at least every six-months. Refer to page 24 for replacement instructions.

Faucet Handles

Dispensing from the hoppers will occur when the faucet handles are installed with the handles in the upright position. (shown, left hopper)

Dispensing from the hoppers will not occur when the handles are in- stalled upside-down. (shown, right hopper) You may consider this handle position when the product in the hoppers is not yet ready to serve. Just spread the handles or disassemble them as shown, and install them upside down.

DISASSEMBLY

1. Unscrew the balls from the handle assemblies. Turn them in a counter- clockwise direction until they are no longer attached to the handles.

2. Remove the metal sleeves from the assemblies.

3. Separate the two halves of the handles and remove them from the faucet bodies.

ASSEMBLY

1.Place the two halves of the handles on the faucet bodies. Check that the faucet dowel pins are in place all the way through the faucet bodies. The dowel pins must be captured by the keyholes in the handle halves.

2.Place the metal sleeves over the threads and install the balls by turning them in a clockwise direction.

14

27646 122200

 

Page 13 Page 15
Page 14
Image 14
Bunn CDS-3 service manual Lubrication, Faucet Handles, Disassembly, Assembly
Page 13 Page 15

CDS-3 specifications

The Bunn CDS-3 is a commercial coffee brewer renowned for its reliability, efficiency, and high-quality performance. Designed for busy environments such as cafés, restaurants, and convenience stores, it offers the perfect balance of capacity and functionality, making it ideal for high-demand situations.

One of the standout features of the Bunn CDS-3 is its ability to brew up to 3.8 gallons of coffee per hour. This impressive capacity meets the needs of busy establishments where a constant supply of fresh coffee is crucial. The brewer’s stainless steel construction not only ensures durability but also maintains temperature, thus preserving the coffee’s rich flavor and aroma.

The CDS-3 incorporates Bunn's patented brewing technology, including the "Pour-Over" method. This feature allows for easy operation and contributes to the even extraction of coffee grounds. The machine is equipped with a pre-infusion mode that saturates coffee grounds before brewing, enhancing extraction for a fuller, more complex flavor profile.

Temperature control is another vital characteristic of the Bunn CDS-3. It maintains the water temperature between 195°F to 205°F, the ideal range for optimal coffee brewing. The brewer’s internals are designed for rapid heating, ensuring that the water reaches the desired temperature quickly and consistently, which is essential for high-quality coffee production.

In terms of usability, the Bunn CDS-3 offers an intuitive interface, allowing staff to operate it with minimal training. The front-access design not only simplifies maintenance, but also makes it easy to refill water and perform routine cleaning. Furthermore, the large capacity coffee pots ensure that the brewed coffee can be stored efficiently, minimizing waste.

Equipped with a unique spray head system, the Bunn CDS-3 ensures uniform saturation of the coffee grounds. This feature supports optimal extraction, allowing users to produce a rich and flavorful brew that keeps customers coming back for more.

In summary, the Bunn CDS-3 is a well-engineered, commercial-grade coffee brewer that excels in high-demand environments. Its robust construction, advanced brewing technology, consistent temperature control, and user-friendly design make it a favorite among coffee enthusiasts and professionals alike, affirming its reputation as a reliable and effective solution for coffee brewing needs. Whether for a bustling café or a catering service, the Bunn CDS-3 delivers a consistently great cup of coffee every time.