SERVICE (cont.)

FAN

P1199.45

FIG. 10 FAN

Location:

The fan is located inside the front panel, mounted on a plate beneath the hopper mounting plate.

Test Procedures:

1.Disconnect the dispenser from the power source.

2.Disconnect the black and white wires from the black leads on the fan.

3.Check the voltage across the black and white wires on the main harness or transformer with a voltmeter. Connect the dispenser to the power source. The indication must be:

a)120 volts ac for two wire 120 volts models.

b)120 volts ac for three wire 120/208 volt or 120/ 240 volt models.

c)120 volts ac for two wire 240 volt models.

If voltage is present as described, replace the fan

If voltage is not present as described, refer to wiring diagram and check the dispenser wiring harness.

Removal and Replacement:

1.Remove hoppers from the dispenser. Refer to Fig. 2 for hopper removal.

2.Remove the four #8-32 screws securing the hop- per mounting plate to the front panel and remove panel.

3.Remove the four screws securing the fan mount- ing plate to the dispenser front panel.

4.Lift fan mounting plate out of the front panel far enough so the fan leads can be disconnected from the main wiring harness.

5.Remove fan mounting plate, fan and exhaust tube as an assembly.

6.Remove the four #8-32 screws and four #8-32 nuts securing exhaust tube and fan to the bottom of the fan mounting plate and discard fan.

7.Install new fan and the exhaust tube to the bottom of the fan mounting plate using four #8-32 screws and four #8-32 nuts.

NOTE: Be sure arrow on the new fan is pointing down.

8.Set fan mounting plate with fan and exhaust tube inside the front panel far enough to connect the black leads from the fan to the black and white leads on the main wiring harness.

9.Install fan mounting plate into position and secure with four #8-32 screws.

10.Install hopper mounting plate using four #8-32 screws.

11.Install hoppers, refer to Fig. 2.

19

27591 031597

 

Page 19
Image 19
Bunn HC-2 HC-3 service manual Fan, Test Procedures

HC-2 HC-3 specifications

The Bunn HC-2 and HC-3 are high-performance commercial coffee brewers designed for cafes, restaurants, and institutions that prioritize quality, efficiency, and reliability. Renowned for their exceptional brewing capabilities, both models come with a range of features that cater to the demanding needs of coffee enthusiasts and professionals alike.

One of the core characteristics of the Bunn HC-2 and HC-3 is their brewing technology. These machines utilize a patented steeping mechanism that allows for optimal water temperature and contact time, extracting the finest flavors from the coffee grounds. The precise temperature control, maintained at a consistent level, ensures that every cup of coffee is brewed to perfection. Furthermore, the machines have an impressive brew capacity, with the HC-2 capable of brewing up to 3.8 gallons per hour, while the HC-3 can brew up to 5.3 gallons per hour, making them ideal for high-traffic environments.

Another significant feature of the Bunn HC-2 and HC-3 is their ease of use. The user-friendly interface allows baristas to quickly set brew cycles and adjust brewing parameters to suit different coffee types. Both models are designed with a sleek, ergonomic aesthetic that fits seamlessly into any workspace, while also being built with durable materials to withstand the rigors of daily use.

In terms of efficiency, these brewers come equipped with energy-saving technology. The automatic warmers on both machines adjust the heat output based on the coffee’s temperature, reducing energy consumption without compromising quality. Additionally, the compact design of these units means they occupy minimal counter space, making them suitable for both small and large establishments.

Maintenance is straightforward with the Bunn HC-2 and HC-3, as they feature a self-diagnostic system that alerts users to any potential issues. This feature minimizes downtime and ensures the longevity of the equipment. Furthermore, the brewing components can be easily accessed for cleaning and maintenance.

In summary, the Bunn HC-2 and HC-3 stand out in the commercial coffee brewing market with their advanced brewing technology, high capacity, user-friendly design, energy efficiency, and ease of maintenance. These features make them a preferred choice for anyone looking to deliver high-quality coffee consistently, ensuring that businesses can satisfy even the most discerning coffee drinkers. With Bunn’s commitment to innovation and quality, these brewers continue to set the standard in the coffee equipment industry.