SERVICE (cont.)

AUGER DRIVE COMPONENTS

P1922

FIG. 2 AUGER DRIVE COMPONENTS

Location

The auger drive components are located in the bot- tom of the hopper assembly.

Removal, Cleaning and Replacement

1.Open the dispenser door.

2.Lift the hopper assembly over the retainer plates

(16)on hopper support plate (12) and slide hopper assembly out the front of the dispenser.

3.Remove hopper lid (1) and empty product.

4.Pull off the ejector elbow (15) and remove the slide gate (21).

5.Remove retainer ring (11) and washer (10) from the bottom of the hopper base (9).

6.Remove wiper shaft (3), wiper blade (4) and wiper drive gear (5) from the hopper base (9).

7.Remove auger wire (14) by pulling it out the front of the hopper base (9).

8.Remove auger drive shaft (13) by removing the retaining clip (6) from auger drive shaft.

9.Slide spacer (8) and auger drive shaft bracket (7) off of the auger drive shaft (13).

10.Remove auger drive shaft (13) from hopper base

(9).

11.Wash components in a mild solution of dish deter- gent using a bristle brush when needed.

12.Rinse and dry each item thoroughly.

13.Check for damaged or broken components, re- place any if necessary and reassemble hopper assembly.

14.Install hopper assembly in the dispenser by sliding hopper assy on the hopper support plate (12) until the hopper base (9) seats firmly behind the re- tainer plates (16) on the hopper support plate (12).

 

1

 

2

 

3

 

4

 

5

6

13

7

8

14

9

20

10

11

15

17

21

 

18

 

19

 

 

16

 

12

 

P1894

 

FIG. 3 AUGER DRIVE & HOPPER ASSEMBLY

1.

Hopper Lid

12.

Hopper Support Plate

2.

Hopper

13.

Auger Drive Shaft

3.

Wiper Shaft

14.

Auger Wire

4.

Wiper Blade

15.

Ejector Elbow

5.

Wiper Drive Gear

16.

Hopper Retainer Plates

6.

Retainer Clip

17.

Auger Motor Bracket

7.

Auger Drive Bracket 18.

Auger Motor

8.

Spacer

19.

Dust Seal

9.

Hopper Base

20.

Auger Motor Mounting

10.

Washer

 

panel

11.

Retainer Ring

21.

Slide gate

13

29793 061599

 

Page 13
Image 13
Bunn POWDER AUTO FILL service manual Auger Drive Components, Hopper Lid, Retainer Clip, Spacer Dust Seal Hopper Base

POWDER AUTO FILL specifications

The Bunn Powder Auto Fill is a cutting-edge coffee brewing system designed to enhance efficiency and precision in commercial environments. This innovative machine simplifies the brewing process by incorporating automated features that ensure consistent quality and optimal performance.

One of the standout features of the Bunn Powder Auto Fill is its ability to automatically dispense powdered beverage mixes. This is made possible through advanced technology that streamlines the process, reducing the need for manual input. With the push of a button, operators can quickly prepare a variety of specialty beverages, including cappuccinos, lattes, and flavored coffee drinks. This not only saves time but also minimizes the likelihood of human error in measurements, ensuring each cup is consistently brewed to perfection.

The Bunn Powder Auto Fill is designed with versatility in mind. It accommodates a wide range of powdered ingredients, allowing businesses to offer an extensive menu without investing in multiple machines. This adaptability makes it an ideal solution for coffee shops, convenience stores, and other establishments where customer preferences may vary.

Moreover, the machine features a robust heating system that provides rapid brewing capabilities. This ensures that beverages are served at the optimal temperature, enhancing the overall customer experience. The integrated hot water faucet allows for quick access to hot water, making it easy to prepare additional drinks or even food items like soups and oatmeal.

Durability is another key characteristic of the Bunn Powder Auto Fill. Built with high-quality materials to withstand the rigors of daily use, this machine is designed to deliver reliable performance over time. Its compact and sleek design allows for easy placement in any setting, taking up minimal counter space while blending seamlessly with existing décor.

Additionally, the Bunn Powder Auto Fill incorporates user-friendly controls and displays. This intuitive interface allows staff to quickly familiarize themselves with the machine's operation, which is crucial in high-demand environments. The system also features programmable settings, enabling users to customize brew strengths and portion sizes according to customer preferences.

In conclusion, the Bunn Powder Auto Fill is a game-changer for businesses looking to elevate their beverage offerings. With its automation, versatility, reliability, and user-centric design, this machine not only boosts efficiency but also enhances the quality of every cup served. Whether in a bustling café or a busy convenience store, the Bunn Powder Auto Fill stands out as a smart investment for any beverage-focused establishment.