SERVICE (cont.)

TEST/SERVICE SWITCH

P1923

FIG. 13 TEST/SERVICE SWITCH

Location:

The TEST/SERVICE switch is located on the left front of the whipper motor mounting panel.

Test Procedure:

1.Disconnect the dispenser from the power source.

2.Disconnect the wires from the switch terminals.

3.Check for continuity between the center terminal and upper terminal with switch in the SERVICE position (lower). Check for continuity between the center terminal and the lower terminal with the switch in the TEST position (upper). Continuity must not be present when the switch is in the center position.

If continuity is present as described, the switch is operating properly.

If continuity is not present as described, replace the switch.

Removal and Replacement:

1.Disconnect the dispenser from the power source.

2.Open the dispenser door and remove the hopper assembly out the front of the dispenser.

3.Remove the four #8-32 screws securing the hopper support panel to the auger motor mounting panel and the whipper motor mounting panel.

4.Slowly lift the hopper support panel up and discon- nect the red/black and green wires from the hopper switch.

5.Remove the facenut securing the TEST/SERVICE switch the whipper motor mounting panel.

6.Remove switch with wires attached from the back side of the whipper motor mounting panel.

7.Disconnect the wires from the switch and discard the switch.

8.Refer to Fig. 14 when connecting the wires to the new switch.

9.Install new switch with wires attached through the hole in the whipper mounting panel and secure with facenut.

10.Connect the red/black and green wires to the hop- per switch. See Fig. 10 on page 17.

11.Install the hopper support panel to the auger motor mounting panel and the whipper motor mounting panel using the four #8-32 screws.

12.Install the hopper assembly.

WHI/ORN from Control

 

Board J1-6

 

GRN from Control

 

Board J1-8

 

BLU/BLK from Control

 

Board J1-11

 

FIG. 14 TEST/SERVICE SWITCH

P1906

 

TERMINALS

 

21

29793 061599

 

Page 21
Image 21
Bunn POWDER AUTO FILL service manual TEST/SERVICE Switch, Location, Disconnect the wires from the switch terminals

POWDER AUTO FILL specifications

The Bunn Powder Auto Fill is a cutting-edge coffee brewing system designed to enhance efficiency and precision in commercial environments. This innovative machine simplifies the brewing process by incorporating automated features that ensure consistent quality and optimal performance.

One of the standout features of the Bunn Powder Auto Fill is its ability to automatically dispense powdered beverage mixes. This is made possible through advanced technology that streamlines the process, reducing the need for manual input. With the push of a button, operators can quickly prepare a variety of specialty beverages, including cappuccinos, lattes, and flavored coffee drinks. This not only saves time but also minimizes the likelihood of human error in measurements, ensuring each cup is consistently brewed to perfection.

The Bunn Powder Auto Fill is designed with versatility in mind. It accommodates a wide range of powdered ingredients, allowing businesses to offer an extensive menu without investing in multiple machines. This adaptability makes it an ideal solution for coffee shops, convenience stores, and other establishments where customer preferences may vary.

Moreover, the machine features a robust heating system that provides rapid brewing capabilities. This ensures that beverages are served at the optimal temperature, enhancing the overall customer experience. The integrated hot water faucet allows for quick access to hot water, making it easy to prepare additional drinks or even food items like soups and oatmeal.

Durability is another key characteristic of the Bunn Powder Auto Fill. Built with high-quality materials to withstand the rigors of daily use, this machine is designed to deliver reliable performance over time. Its compact and sleek design allows for easy placement in any setting, taking up minimal counter space while blending seamlessly with existing décor.

Additionally, the Bunn Powder Auto Fill incorporates user-friendly controls and displays. This intuitive interface allows staff to quickly familiarize themselves with the machine's operation, which is crucial in high-demand environments. The system also features programmable settings, enabling users to customize brew strengths and portion sizes according to customer preferences.

In conclusion, the Bunn Powder Auto Fill is a game-changer for businesses looking to elevate their beverage offerings. With its automation, versatility, reliability, and user-centric design, this machine not only boosts efficiency but also enhances the quality of every cup served. Whether in a bustling café or a busy convenience store, the Bunn Powder Auto Fill stands out as a smart investment for any beverage-focused establishment.