material when hot. A propriety non-abrasive ceramic hob cleaner such as ‘hob brite’ can be used to clean the glass.

9.When the heater is not used for a time, ensure the gas control or adjacent isolator is turned off. The heater is not to be used for a time, ensure the gas control or adjacent isolator is turned off.

10.The heater must not be used in rooms where the atmosphere is likely to contain water or chemical vapours, which may adversely affect the appliance or its finish.

11.Do not use whilst painting & decorating, or in newly decorated rooms as the residue can lead to unpleasant smells from the appliance. Always cover or have the appliance removed when decorating.

CONTROLS

The fire is fitted with a gas valve and a thermostat. The thermostat automatically regulates the room temperature by turning the heat output (flames) up or down between high, half or pilot only.

.The thermostat bulb must be resited to a cool area to measure the air temperature in the room more accurately. See installation instructions or consult the manufacturer.

LIGHTING PROCEDURE

Make sure there is no smell of gas

1.Open the lower cover to reveal the gas control.

2.There are 2 control knobs on the appliance. The left hand one (coloured red) controls On / Off and High / Low flame. The right hand one (coloured black) is the comfort level thermostat which turns the fire to pilot position once the desired temperature is reached. Some people prefer to retain a flame effect using the left hand knob to control its height whilst keeping the thermostat set on hot. Others prefer to use the fire purely as a heater in which case they will select a flame height then set the thermostat to a comfort level. In both cases if the room gets too hot, the thermostat will reduce the fire to pilot setting. If during use the pilot is alight but the main burner will not light, check the thermostat position and if necessary select a warmer setting.

3.To light the fire, press the left hand (red) control knob for several seconds then turn anticlockwise to the ignition position. A click will be heard and the pilot (under right side of fuel bed) should light. If it does not repeat the operation a few times. Continue to hold knob for 15 – 20 sec's to establish the pilot and then release. If pilot fails to establish, turn off, wait 1 minute then repeat the lighting procedure. Rotate the control knob to high flame to light then back to the desired flame position. If no gas comes through rotate the right knob (thermostat) to a hotter room setting and the fire will light.

4.Control the fire by a combination of thermostat and / or flame setting to suit your mode of use

5.To turn the fire off, rotate the left hand knob fully clockwise.

NOTES

1The first time that the appliance is used, there will be some odour produced due to the newness of the materials. It is recommended that the unit is fired at maximum setting for

several hours and the room is kept ventilated during this period. It is usual for flueless appliances to produce an initial odour after start up.

2When the pilot flame is alight, the unit may be controlled by turning the knob anywhere

between 1 and 7. If the pilot flame should ever extinguish of its own accord, ventilate the room and allow a minimum of 5 minutes before relighting.

3Never attempt to relight the unit if there is a gas smell.

11

Page 11
Image 11
Burley G4121 mk2 warranty Controls, Lighting Procedure

G4121 mk2 specifications

The Burley G4121 mk2 is a cutting-edge bicycle that exemplifies the fusion of performance, comfort, and durability. Built for both novice and experienced riders, this model reflects Burley's commitment to engineering excellence and innovative design.

One of the standout features of the G4121 mk2 is its lightweight aluminum frame. This construction material not only contributes to the bike's overall agility but also enhances its resistance to corrosion and wear. The geometry of the frame is meticulously designed to provide an optimal balance between speed and stability, making it ideal for various terrains, from urban roads to light trails.

Equipped with a Shimano 21-speed transmission, the Burley G4121 mk2 offers riders the versatility needed to tackle steep climbs or swift descents effortlessly. The smooth shifting mechanism ensures precise gear changes, allowing riders to maintain momentum without sacrificing control. This model also features a reliable braking system, incorporating both front and rear disc brakes, which provide excellent stopping power and responsiveness, crucial for navigating through dynamic environments.

Comfort is a key aspect of the G4121 mk2. The bike is fitted with an ergonomic saddle and adjustable handlebars, accommodating different riding styles and preferences. Puncture-resistant tires enhance safety and offer peace of mind during longer rides, minimizing the risk of being stranded due to flat tires.

Incorporating advanced technologies, the G4121 mk2 boasts a lightweight, adjustable suspension system. This feature absorbs shocks from uneven surfaces, ensuring a smoother ride and reducing fatigue during extended journeys. Additionally, the bike’s reflective elements improve visibility in low-light conditions, enhancing safety for commuters and weekend adventurers alike.

The Burley G4121 mk2 also considers practicality with its integrated mounts for racks and fenders, allowing riders to customize their bike for commuting or touring experiences.

In conclusion, the Burley G4121 mk2 stands out not just for its performance characteristics but also for its thoughtful design aimed at enhancing rider experience. It is a versatile bicycle that successfully caters to both form and function, making it a popular choice among cycling enthusiasts.