7
Burley Nomad Owner’s Instruction and Safety Manual
Install Tailgate and Splashguard
Snap the tailgate into place as shown in the illustration below. Start by ensuring there is
suffi cient slack in the 1” webbing to allow you to loop the webbing over the side panel
and lock it into place in the corresponding side release buckle sewn to the inside of
the side panel. Repeat for the other side of the tailgate. In a similar fashion, attach the
front splashguard to the front side panels. The tailgate and splashguard are adjustable
to accommodate any size or amount of cargo you wish to carry in your Nomad. Simply
tighten or loosen the 1” webbing as required. For normal cargo carrying modes, the
tailgate and splashguard should be adjusted so they are tight to minimize the entry
of water and dirt.
Splashguard
Tailgate