Burley HP 4489 III. Install Rear Reflectors, Wheel axle assembly inserts into hollow trailer axle

Wheel axle assembly inserts into hollow trailer axle

Once the wheels are fully seated in the hollow axle, the quick-release laver should be positioned so that it is aimed to the rear of the trailer in the “CLOSED” position (the lever is marked for OPEN or CLOSED positions). The wheel quick-release/axle assembly comes preadjusted from Burley.

Make sure wheels are held securely, with wheel shaft fully inserted into the hollow axle. You should not be able to rock or shift wheels. Improperly installed wheels can fall off, causing an accident or serious injury.

With wheels mounted, both reflectors must face outward. Check to see that both reflectors have been installed correctly. Incorrectly installed reflectors can reduce visibility at night and cause an accident or serious injury.

III.Install Rear Reflectors

In the hardware bag, you’ll find the parts needed to install the rear reflectors:

(2) Reflector bracket

(2)Self-tapping Phillips screw, bracket

(2)Rear reflector, red

(2)Self-tapping slotted screw, reflector

4

Burley Nomad Owner’s Instruction and Safety Manual