Burris LH 3, LH 3000, LH 4, LH 6000 - page 27

Chapter 3 Conversion: Install Components, Cover, and Front Bezel
23
As you mount the control panel, ensure that the ribbon cable goes
completely back inside the NetServer. Do not damage the ribbon cable with
the control panel.
6. Replace the two screws to secure the control panel to the chassis.
7. Refer to Figure 3-4. Mount the control panel bezel over the control panel in
the set of slots appropriate for your rack:
◊ Slots for the HP rack are on the right.
◊ Slots for the Compaq rack are on the left.
Compaqrack slots (on left)
HPrack slots (on right)
Figure 3-4. Reattach the Control Panel Bezel