OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a loader equipped with 72” material bucket operated with an average tractor hydraulic system of 10.8 GPM with engine operating at 1950 RPM and control valve relief setting of 2750 PSI.
Horsepower Range | ||
System pressure/flow rate | 2750 PSI/ 10.8 GPM | |
Lift Capacity to maximum height at pivot pin | 2720 lbs. | |
Breakout force at pivot pin | 6530 lbs. | |
Rollback force at ground line | 2600 lbs. | |
Total weight with bucket (approx.) | 1550 lbs. | |
Raising time to full height | 6.83 seconds | |
Lower time | 4.88 seconds | |
Attachment dump time (regen.) | 4.92 (3.40) seconds | |
Attachment rollback time | 3.65 seconds | |
Hydraulic system flow | 10.8 GPM | |
System pressure at rated flow | 2750 PSI | |
(A) | Maximum Lift Height at Pivot Pin | 119” |
(B) | Clearance with Bucket Dumped | 93” |
(C) | Reach at Maximum Height | 33” |
(D) | Maximum Dump Angle | 44° |
(E) | Reach with Attachment on Ground | 69” |
(F) | Attachment Rollback Angle | 23° |
(G) | Digging Depth | 2” |
(H) | Overall Height in Carry Position | 65” |
(Manufacturers estimated specifications and design subject to change without notice.)
2547 01/11 | Operation Section |
© 2011 Alamo Group Inc.
