24
TrOubLE SHOOTING TAbLE
If unit does not turn on - LCD does not illuminate:
•DepressPOWERbutton.
•Checkandifnecessary,replacebattery.
If unit powers down (display goes blank when attempting to power the laser):
•Thebatteryiseitherweakorlowquality.Replacethebatterywithagoodquality
3 -volt lithium battery.
If target range cannot be obtained:
•MakesureLCDisilluminated.
•Makesurethatthepowerbuttonisbeingdepressed.
•Makesurethatnothing,suchasyourhandornger,isblockingtheobjectivelenses(lensesclosest
to the target) that emit and receive the laser pulses.
•Makesureunitisheldsteadywhiledepressingpowerbutton.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim
at the new target using the LCD’s reticle, depress the power button and hold until new range reading is
displayed.
Specifications, instructions, and the operation of these products are subject to change without notice.