The vertical bars on the bottom of the screen show the signal strengths acquired from the satellites.
The GPS requires at least 4 satellites to determine its
position. Once the GPS position has been correctly determined, the position coordinates are displayed at the bottom of the screen.
Turning the GPS On/Off
When the ONIX 110 is used indoors, the device may not receive a sufficient GPS signal and a warning message will appear on the screen. This warning message does not go off until GPS is turned off.
To turn off GPS, do the following:
1.Press the Menu button twice to display the OSD menu.
2.Select GPS Off to turn off the GPS function. The device will stop acquiring satellite data.
3.To resume the GPS function, press the Menu button to choose GPS On and press OK.
Viewing the Map Page
Press the Page button to toggle between the map page and the compass page. On the map page, an 
icon indicates your current location and the 
icon indicates your home location. Press the Menu
button to start navigation.
When navigation is initiated, a route between the Home location and your current location is displayed on the screen. You can refer to the route to help you
go back to your Home location. Press the ESC button to return to the map page.
15
