2.Select Display (Fig. 4) and press OK to confirm.
An LCD scale bar is displayed on the map page.
3.Use the navigation keys to adjust the LCD level.
Press the navigation key to the right to increase the LCD contrast and to the left to decrease the contrast as required.
Using the ONIX 110 in Simulation Mode
In normal or navigation mode, the ONIX 110 tracks its position through satellite information. In simulation mode, the device stops acquiring data from the satellites. When you are planning a trip, use the simulation mode to look up maps, to adjust system settings, and to conserve battery consumption.
There are two different ways to switch to simulation mode:
To switch to simulation mode from the satellite page:
1.Press the Menu button to display the OSD menu
(Fig. 5).
2.Use the navigation keys to select GPS Off and press OK to confirm. The device stops acquiring satellite information and enters simulation mode.
3.To return to navigation mode, repeat steps
1and 2, and select GPS On to resume satellite navigation.
To switch between simulation and navigation mode from any page:
1.Press the Menu twice button to display the
OSD menu.
2.Use the navigation keys to select User Settings (Fig. 6) and press OK.
3.Under the Set 1 tab, use the navigation keys to highlight Navigation Mode option and press OK.
4.Use the navigation keys to select Simulation
Fig. 5
Fig. 6
Fig. 7
17
