Bushnell 118328 instruction manual Caring for the ImageView, Cleaning the Optics

5.Rotate the right eyecup to bring the object into focus in the right side of the binocular. Avoid over- turning or forcing the diopter adjustment. If you are unable to bring the object into focus in the right side by rotating the eyecup, make sure the left side is still focused and that the center focus knob was not moved from its original setting. The diopter adjustment only affects the right side.

6.The ImageView binocular optics should now be adjusted for your individual eyesight. Focusing for any distance can now be done simply by turning the center focus knob.

GENERAL CARE AND CLEANING

Caring for the ImageView

Your Bushnell ImageView will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument.

•Avoid sharp impacts. Set the ImageView down gently on hard surfaces.

•Tug on the strap after attaching it to make sure it is securely fastened to the binocular before placing it around your neck.

•Store your ImageView in a cool, dry place whenever possible. Remove the batteries if the ImageView will be stored for a long period of time.

Cleaning the Optics

•Blow away any dust or debris on the lens (or use a soft lens brush).

•To remove dirt or finger prints, clean with the supplied micro-fiber cloth rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. A washable “microfiber” cleaning cloth is ideal for the routine cleaning of your optics. Simply21