Bushnell 118328 instruction manual Shooting Videos Using Video Mode

Shooting Videos (Using Video Mode)

To enter Video mode (from Photo mode), briefly press the POWER/MODE button (C). The red movie camera icon appears at the top right corner of the display (pg. 4, #8). Start shooting the video at any time by pressing the OK/SNAP button. The counter at the bottom of the display changes to red and shows the elapsed recording time. The recording time is limited only by the amount of internal or card memory currently available. You may record a single long video until you run out of memory or multiple shorter videos by stopping and starting recording whenever you wish by pressing OK/SNAP. Press OK/SNAP again to stop recording. Press POWER/ MODE to switch back to still photo mode.

The video quality/file size can be set by pressing MENU, select “Size” (if not already highlighted) and press OK/ SNAP. You can the select your preferred video resolution from “HD” (highest quality, largest files) to “QVGA” (lowest quality, smallest files). Note: regardless of the resolution setting, all videos are recorded in at a 30 fps frame rate, in .avi format. The ImageView does not record audio.

Press the RIGHT arrow key to review a video after you shoot it. Press the UP arrow key to begin playback, press it again to pause playback. During playback, the counter on the right displays elapsed time. When you are ready to return to the live preview display to shoot more videos (or stills), press the POWER/MODE button.

9