Bushnell 119439, 119440 instruction manual Video Length

Parameter	Settings	Description
	(Bold=default)
Video Length	10S (second)	Sets length per captured video
(only affects	default, with 60S	clip. Settings begin with 10 second
video clips in	to 5S possible	default when parameter is first
Video or Hybrid	range	selected. After stepping down to
modes)		5S, video length settings start over
		at 60S.
Interval	10S (second)	Selects the length of time that the
	default, with a	camera will “wait” until it responds
	60M (minute)	to any additional triggers from the
	to1S (second)	PIR after an animal is first detected
	range of settings	and remains within the sensor’s
	available.	range. During this user set “ignore
		triggers” interval, the camera will not
	(60M-1M are set	capture photos/videos. This prevents
	in one minute	the card from filling up with too
	increments,	many redundant images. Settings
	59S-1S are set	begin with 10 second default when
	in one second	parameter is first selected. Note: after
	increments)	setting down past “1S”, settings start
		over at “60M”.

Location of the 8 LEDs that fire when

LED Control parameter is set to "Low"

21