Bushnell 119439, 119440 instruction manual Reviewing Images by Connecting the Camera to a Computer

Cable from

“A/V Out”

the device. Connect a TV monitor or a viewing device (such as a digital picture frame) that has a standard composite video input (RCA jack) to the NatureView Cam ‘s “A/V Out” mini jack using the supplied cable. Then:

•Put the power switch in SETUP mode (switch to OFF first).

•Press the OK key. The most recently captured image will be shown on the video monitor. For video clips, press the SHOT (RIGHT) key to start playing, press again to stop.

•Press the UP key for the previous photo or video and the DOWN key for the next one. When viewing images, the total number of all images in the SD card

and the index of the displaying image are shown in the center of LCD and at the bottom of the video monitor respectively.

•Press the OK key to return to live preview state (SETUP mode) when playback is finished.

Reviewing Images by Connecting the Camera to a Computer

You can always unmount the entire camera from the tree and connect its USB port to a computer-it will be recognized as a “removable disk”, without the need to install any drivers or software. When using a PC (or Mac*) to view photos (or video clips*), first connect the device to the computer with the supplied USB cable. Then use commercial software with an image browser feature, or an image browser included with the PC’s operating system to view images saved on the SD card in the folder \DCIM\100EK113. Each new image or video will be numbered incrementally in order of the time it was captured. For example, you will see file names such as “EK0001.JPG” or “EK0001.AVI”, etc. Through the file format suffix you can distinguish whether the file is a still photo (with suffix .JPG) or a video (with suffix .AVI).

*video files may require additional software for viewing on a Mac.

The NatureView Cam supports 3 kinds of file system formats, FAT12, FAT16, and FAT32. The default value is FAT16 to save photos and videos. Here are some related notes:

•You don’t need to be concerned about the file system format of the NatureView Cam unless your equipment has problems reading the SD card. If this happens, please format the SD card with the

31