Bushnell 119440, 119439 instruction manual Coordinate, See Using, Setup Menu, Input Screens

Parameter	Settings	Description
	(Bold=default)
Field Scan	On, Off	Turns Field Scan (Time Lapse)
	(After On is	recording mode on/off. When
	selected): “A”	activated, Field Scan forces the
	Start/Stop, “B”	camera to take photos or videos
	Start/Stop,	even when it is not triggered by a
	Interval	nearby live animal, useful for constant
		monitoring of an area that might be
		far away from the camera. The user
		can set the start and stop times for
		up to two independent “blocks” of
		Field Scan recording, as well as the
		interval time between each photo/
		video. To ensure correct operation,
		avoid setting overlapping start/stop
		times for Field Scan A and B. Please
		read the “Field Scan 2x…” section of
		this manual for details on using this
		feature. NOTE: If the "Camera Mode"
		parameter is set to "Day" or "Night"
		operation only, that will take priority
		over your Field Scan settings. Set
		Camera Mode to "24HR" if you are
		setting day and night Field Scan start
		and/or stop times.
Coordinate	Off, On	Allows the user to input latitude
Input		and longitude coordinates for the
	See "Using the	camera’s location. This data will
	Setup Menu	be embedded in the files saved on
	Input Screens"	the camera’s SD card (if “On” is
		selected). This makes it possible
		to see each camera’s location as a
		“pushpin” on Google Earth maps
		when reviewing a folder full of pho-
		tos from multiple cameras, or use
		other “geotag” capable software
		(Picassa, etc).

24