INSTALLING THE BATTERIES AND SD CARD

Before you begin learning how to use your Trophy Cam, you will first need to install a set of batteries and insert an SD card. Although that may only take you a minute, there are some important notes about both batteries and SD cards you should be aware of, so please take the time to read the following

directions and cautions:

Battery Slot #s

1

3

5

7

9

11

 

Loading Batteries

 

 

 

 

 

 

2

4

6

8

10

12

 

 

 

After opening the two latches on the right side of the Trophy Cam, you will see that the Trophy Cam has twelve battery slots. For maximum battery life, you should install a full set of twelve batteries. The Trophy Cam may also be operated by just four batteries installed in slots 1-4 only (see right), starting at slot 1. Battery life will be shorter with 4 batteries, but the camera will operate normally. Whether you use 4 or 12, be sure to insert each battery with correct polarity (negative or “flat” end against the long spring of each battery slot).

Bushnell recommends using twelve new lithium AA (Energizer® brand) or alkaline AA batteries. NiMh Rechargeable batteries can also be used, but they might have a shorter life span due to their reduced efficiency over time and at low temperature. It is also possible to use a lead-acid external battery cell with 6V output or suitable AC adapter-see below for more details.

Using an External Power Source (optional, user provided)

Optionally, you can connect an external 6V DC power source to the “DC In” jack at the bottom of the Trophy Cam. It is recommended to use a power source with a current output greater than 1000mA. However, during bright daytime operation when no flash is required, the Trophy Cam can function with much less current (>400mA). Please use a compatible power source cable (not provided) to connect the external DC power source with the power input jack of the Trophy Cam, making sure that the polarity is correct. Note: The power connector is a 4.0x1.7mm coaxial DC power plug with positive “tip” (inside pin) polarity (Radio Shack P/N 274-1532 or equivalent).

If both an external power source is connected and batteries are installed, the Trophy Cam will be powered by the external power source.

7

Page 7
Image 7
Bushnell 119467, 119466 instruction manual Installing the Batteries and SD Card, Directions and cautions Battery Slot #s

119467, 119466 specifications

The Bushnell 119466 and 119467 models are part of the popular Trophy Cam series, well-regarded by outdoor enthusiasts and wildlife watchers. These trail cameras are designed to provide reliable performance, durability, and high-quality images, making them a preferred choice for capturing wildlife activity.

One of the standout features of the Bushnell 119466 and 119467 cameras is their impressive image quality. Both models boast a 20-megapixel camera sensor that delivers sharp and vibrant images, even in low-light situations. They also feature an advanced night vision capability with infrared illumination, which helps users capture crisp nighttime images without spooking wildlife. The cameras can capture still photos, as well as HD video, allowing users to document every moment in stunning detail.

These models also come with a fast trigger speed, ensuring that even the quickest animals are captured in action. The Bushnell Trophy Cam series is known for its impressive detection range, which can reach up to 100 feet. This feature ensures that users can effectively monitor large areas without the need for multiple cameras.

Another notable technology integrated into these cameras is their lower power consumption, which is significantly enhanced by the innovative 'Hyper Night Vision' technology. This ensures longer battery life, allowing users to capture longer periods of activity without the need for constant maintenance or battery replacement.

Durability is key in outdoor devices, and the Bushnell 119466 and 119467 are no exceptions. Built with a weather-resistant casing, these cameras can withstand various environmental conditions, including rain, snow, and extreme temperatures. This resilience ensures that users can rely on their cameras year-round, regardless of fluctuations in weather.

Additionally, these cameras come equipped with an intuitive user interface, making setup and operation straightforward. With programmable settings, users can customize aspects such as photo resolution, video length, and sensitivity to ensure optimal performance tailored to their specific needs.

In summary, the Bushnell 119466 and 119467 trail cameras combine high-resolution imaging, advanced night vision technology, quick trigger response, and robust durability. These features make them an excellent choice for wildlife monitoring, security, or even outdoor adventures, providing users with an invaluable tool for capturing life's moments in the wild. Whether you're a seasoned hunter or a nature enthusiast, these cameras enhance your outdoor experience with their reliability and performance.