Bushnell 70-0102 Appendix HOW the Weather Forecaster Works, Battery Life, Trouble Shooting

APPENDIX: HOW THE WEATHER FORECASTER WORKS

Your barometer is a tool to that measures how heavy the air is. The trend is more important for forecasting than the absolute amount of pressure. Generally speaking, a rising barometer means that the air is becoming more stable (and nicer) and a falling barometer means the air is becoming less stable (stormier). Your unit is designed to forecast the weather 12 to 24 hours from now.

Weather Forecast

The weather forecast for the next 12-24 hours is calculated from absolute pressure once the unit is powered up.

Absolute Pressure / mbar	Weather Condition
P < 970	Rainy
970 < P <1000	Cloudy
1000 < P < 1030	Partly Cloudy
P >1030	Sunny

Your DNS Pro takes barometric pressure every hour and compares current pressure with the previous one to trace the change. If pressure keeps rising or falling for more than 3 hours, weather condition will be changed relative to the change in pressure.

The weather forecast is calculated from the change in pressure per time period. The change in weather condition is directly proportional to the speed of change in barometric pressure. A rising slope indicates High Pressure System and a good (stable) weather trend. A falling slope means a Low Pressure System and worsening weather trend (unstable).

Fluctuations in pressure typically due to a sudden change of conditions (ex. rapid change in elevation due to flying from one elevation to another) are filtered out and no weather forecast is made. If this happens, the unit will restart monitoring the pressure for required time period. Barometric pressure that keeps constantly rising or falling during the past 3 hours will effectively change the forecast weather condition.

2

BATTERY LIFE

Your DNS is designed for continuous use and batteries will last over one year with regular usage. Heavy use of the alarms, light, or compass will shorten battery life.

TROUBLE SHOOTING

•If the Cardinal points (N, NE, E, SE etc.) on your compass blink – Try holding the compass LEVEL using the bubble level as a guide. The Cardinal points may also blink when the Compass encounters magnetic interference from the surrounding areas. The Cardinal points blink because the Compass is unable to measure Bearings accurately. If this does not fix the blinking, please recalibrate your compass. Remember to keep the Compass away from metal objects which may cause magnetic interference. Also double check that your declination is properly set (In general, zero degrees should be the default setting).

•Three dashes are displayed – Your compass has gone into a "sleep" mode to save batteries. Press COMP/+ to reactivate the compass.

•Can’t turn unit off – This unit is designed to be constantly on and the batteries will last about a year assuming normal usage.

•The Temperature does not seem accurate – remember that it takes 15 minutes for the unit to adjust to the ambient temperature. Keeping the unit in a pocket or in direct sunlight will impact the temperature.

•My weather forecaster shows rain but it is sunny right now – Your weather forecaster is designed to forecast the weather 12-24 hours from the current time.

•Reset compass – If, during operation, an external electrodischarge occurs near the compass, the unit may exhibit erroneous readings. To solve this problem, the watch must be reset and recalibrated. The watch is automatically reset when the battery is removed.

•If your wristtop goes into a test mode after inserting the battery – you will need to re-install your battery. Remove battery. Wait 10 seconds then carefully re-insert the battery making sure that it is well placed in the battery compartment. Close battery door.

•You will know that your wristtop has gone into test mode – if you see the LCD segments around the display turning on one-by-one and moving in an counter-clockwise direction. After the test mode is completed, your wristtop will return to normal. The test mode will not harm your

wristtop's normal operation.

15 14 3