TROUBLESHOOTING

WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS

Q: Nothing happens when the Power Button is pressed!

1.0Make sure that the Power Cord is not damaged in any way.

2.0 Be sure that the female end of the Power Cord is plugged completely into the Power Supply Port of the Vacuum Sealer, and that the male end of the Power Cord is firmly plugged into the wall outlet (Figure F).

Check to see if the 3.0 If the Vacuum Sealer is properly plugged in, Fuse is darkened. and the Power Button still does not work, check

the Fuse, located above the Power Supply Port, on the right side of the Vacuum Sealer. Twist the Fuse Holder off, then look at the clear tube to see if the Fuse is darkened. If the Fuse is darkened, it will need to be replaced with a standard 8-Amp Fuse.

Figure F

OI

REMOVED FROM THE OUTLET/POWER SOURCE!

PROTECTIVE TAPE

There is a factory installed

strip of Teflon Tape on the Vacuum Sealer.

DO NOT REMOVE THE TAPE!

Figure 1

4.0If the Fuse does not need to be replaced, you will need to be sure the electrical wall outlet is properly working. Plug in another appliance to see if that appliance works from the wall outlet. USE ONLY TIME-DELAY FUSES.

5.0 If none of the above steps remedy the situation, contact Customer Service.

Q: My Vacuum Sealer shut off and will not start again.

1.0The Thermal Overload Protector may have been activated. In this case, allow the Vacuum Sealer to cool by opening the Vacuum Lid for approximately 20 minutes. Be sure to leave the Vacuum Lid open between bag sealing.

2.0Be sure that the female end of the Power Cord is plugged completely into the Power Supply Port of the Vacuum Sealer, and that the male end of the Power Cord is firmly plugged into the wall outlet.

3.0If the Vacuum Sealer is properly plugged in, and the Power Button still does not work, check the Fuse, located above the Power Supply Port, on the right side of the Vacuum Sealer. Twist the Fuse Cap off, then look at the clear tube to see if the Fuse is darkened. If the Fuse is darkened, it will need to be replaced with a standard 8-Amp Fuse (Figure F).

4.0If the Fuse does not need to be replaced, you will need to be sure the electrical wall outlet is properly working. Plug in another appliance to see if that appliance works from the wall outlet.

5.0 If none of the above steps remedy the situation, contact Customer Service.

TEFLON TAPE

OVAL VACUUM CHAMBER SEALS

DO NOT

REMOVE!

DO NOT REMOVE!

The Seal Bar Heating Element is covered with Teflon Tape to protect vacuum bags during sealing (Figure 1). DO NOT remove the Teflon Tape. See the “Maintenance Kit” section of this manual for information on replacing the Teflon Tape, if necessary.

NOTICE!!

PLEASE DO NOT DISCARD THE ORIGINAL

SHIPPING PACKAGE AND THE INNER CARTONS!

IN THE EVENT THIS UNIT MUST BE RETURNED FOR SERVICE OR ADJUSTMENTS, THE PRODUCT IS BEST PROTECTED DURING SHIPMENT IF THE PRODUCT IS RETURNED IN THE

ORIGINAL SHIPPING CARTON.

-20-

-5-

Page 5
Image 5
Cabela's 08-0601-C manual Troubleshooting, Protective Tape, Nothing happens when the Power Button is pressed

08-0601-C specifications

Cabela's 08-0601-C and 51-7403 models represent the essence of outdoor gear innovation, designed with the serious adventurer and outdoorsman in mind. Each product combines functionality and durability, ensuring that users can rely on them in the harshest conditions.

The Cabela's 08-0601-C is a meticulously crafted piece of equipment, designed primarily for hunting enthusiasts. Its material composition features heavy-duty, water-resistant fabric, which ensures that gear stays protected against the elements. One of the standout features is its reinforced stitching and rugged zippers, providing additional durability during extensive use. This product incorporates a spacious main compartment, ideal for storing essential hunting gear, while exterior pockets facilitate organized access to smaller items. The design is also user-friendly, featuring adjustable straps that allow for a customizable fit, making it comfortable for prolonged wear.

On the other hand, the Cabela's 51-7403 is engineered with advanced technologies aimed at enhancing the outdoor experience. This model's insulation technology stands out, both for warmth and for lightweight properties, ensuring that the wearer remains comfortable regardless of the external temperatures. The use of moisture-wicking fabric enhances comfort by keeping sweat at bay, an essential feature during high-energy activities.

Both products emphasize mobility, with each model designed to promote freedom of movement while ensuring all necessary gear is conveniently accessible. This is particularly beneficial for individuals engaging in dynamic activities like hiking or hunting.

Another specific characteristic shared between these models is their eco-friendly manufacturing processes. Cabela's is committed to sustainability, utilizing materials that minimize environmental impact without sacrificing performance. Moreover, both products feature a range of camo patterns, allowing users to blend seamlessly with their surroundings, thus enhancing stealth during outings.

In summary, the Cabela's 08-0601-C and 51-7403 offer outstanding features and technologies that cater to the needs of outdoor enthusiasts. With their focus on durability, comfort, and eco-friendliness, these models are exemplary choices for anyone looking to enhance their outdoor adventures, providing peace of mind while traversing nature's wilderness.