Showing Current Settings
4-4 Configuring the RoamAbout Access Point
Showing Current SettingsYou can display the sett i ngs that the AP is current ly us ing.
Using the AP Manager, select the AP in the Managed List field and click the various
buttons, such as Wireless Para met er s, Operating Modes, IP Network Parameters,
and Hardware.
In the Wireless Parameters dialog, click the Advanced button to view all the wir eless
parameters. If you see a Normal button instead of Advanced, the dialog is currently
displaying all the wireless parameters. If you have changed any wireless parameters
and have not yet reset the AP, the operating (current) settings are displa yed on the left
and the settings that will take affect after the next reset are on the right.
Using the console port, choose Show Current Settings to display the current AP
settings, as shown below.
======================= ======================= ===================
RoamAbout Access Point, Wireless-to-Wired Bridg e:HW=V1.0,RO=V1.4,SW=V4 .
n
SysUpTime : 00:26:3 7 98 resets
SNMP Read/Write Community : public
Console Password : Disable d
SNMP Trap Addresses : Not Configured
In-Band Interface Hardw are Address : 08-00-2 B-A3-89-61
In-Band Interface IP Ad dress : 16.20.4 0.156
In-Band Interface Subne t Mask : 255.0.0 .0
In-Band Interface Defau lt Gateway : Not Con figured
Wired Ethernet MAC Addr ess : 08-00-2 B-A3-89-61
Wireless Ethernet MAC Address : 00-60-6D-92-00-FB
Wireless Network Adapter : RoamAbout IEEE 2.4 GHz DS
Adapter Revisions : Hardwar e 2.000 Firmware 3.01
Bridge Mode : Work Gr oup
Upline Dump : DISABLED
Memory : 4194304 bytes
======================= ======================= =====================
Press Return for Main M enu ...