Configuring the RoamAbout Access Point 4-17
Configuring the AP for SNMP Management
To change or delete the Acce ss P oi nt ’s curr ent IP add re ss usi ng t he AP Ma nag er:
1) Select the Access Point in the managed list.
2) Click the IP Network Parameters button.
3) Set the Address State to Volatile then click OK.
4) In the main AP Manager window, click the Reset/Reload butt on. Then cl ick Reset
with Current Settings. This will set the IP address back to 0.0.0.0. The Access
Point is no longer manageable by the AP Manager.
5) Use the Setup/Add New Access Point button to give the Access Poin t a new I P
address and add it back to the list of managed Access Points.
To enter the AP’s IP address, subnet mask, and default gateway using the console
port:
1) At the RoamAbout Installation Menu, choose Set In-Band Interface IP Address.
2) Enter the IP address, subnet mask, and default gatewa y. You do not need to reset
the AP.