Software Conventions 1-5
Introduction
Figure 1-1. Sample Window Showing Informational Text Boxes
Device Name
Displays the user-defined name of the device. The device name can be changed
via the System Group window; see the Generic SNMP Management Module
Guide for details.
IP Address
Displays the device’s IP (Internet Protocol) Address; this will be the IP address
used to define the device icon. The IP address is assigned via Local Management,
and cannot be changed via SPECTRUM Element Manager. Note that although
each interface on a 9H42x-xx module has its own MAC, or physical, address, only
a single IP address is assigned.
Location
Displays the user-defined location of the device. The location is entered through
the System Group window; see the Generic SNMP Guide for details.
MAC Address
Displays the manufacturer-set MAC address of the interface through which
SPECTRUM Element Manager is communicating with the 9H42x-xx module
(typically the SMB10 backplane management interface). MAC addresses are
factory-set and cannot be altered.
IP Address MAC
Address
Device
Name Location